2
Process/Operation > Updater > Preparation > Network Settings
■ Network Settings
● Connecting to External Network
The method of connecting to external network is similar to a normal network connection
method. Refer to user manual of the device for details.
NOTE:
•
See User Manual for how to connect the device to the external network.
•
Before using UGW link or User mode, see the sections below to prepare as required.
"Enabling UGW Link"
"Enabling [Update Firmware] Button of User Mode"
"Enabling [Install Application/Options] Button of User Mode"
NOTE:
"External Network" here means the network connecting the device to CDS via Internet.
2
Process/Operation > Updater > Preparation > Network Settings
● Confirming URL Setting of Distribution Server
This section describes how to confirm the URL setting of the distribution server.
1. Start [Service Mode] at Level 1.
2. Press [Updater] button.
3. Press [Software Management Settings] button.
2-197
F-2-327
F-2-328
2-197