Canon imageRUNNER ADVANCE C2030 Service Manual page 385

The number of the selectable optional languages in the "Optional Language Setting" is
equivalent to the maximum number of optional languages.
The number of the optional languages to be added to the machine is equivalent to the
maximum number of optional languages minus the number of the optional languages installed
to the machine.
Error will not occur even the number of the installed optional languages is greater than the
maximum number of the optional languages.
In such a case, any new optional language cannot be added, but the firmware of the installed
optional language is downloaded in the Assist Mode.
The picture shown below is the example of the case that Finnish is installed to the machine,
and Danish and Dutch are selected in the "Optional Language Setting".
Only two optional languages can be installed to the machine and Finnish is already installed.
Therefore, either Danish or Dutch can be installed to the machine.
6
Troubleshooting > Version upgrade > Version Upgrade via SST > Optional language support
F-6-56
6 Troubleshooting > Version upgrade > Version Upgrade via SST > Optional language support
● Firmware to be exported to USB memory
When the firmware of the selected optional language in "Optional Language Setting" is
installed to SST, it is exported to the USB memory.
The firmware of the other optional languages are not exported to the USB memory.
When Danish and Dutch are selected in the "Optional Language Setting", the firmware of
these languages are exported to the USB memory as shown below.
6-39
F-6-57
6-39