Canon imageRUNNER ADVANCE C2030 Service Manual page 636

COPIER > ADJUST > HV-TR
TR-DUP2 Sec trns indiv setting feed side: set 2
Lv.2 Details To set the feed side for setting 2.
Setting 2 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV2,
TR-PPR2, TR-CLR2 and TR-DUP2. When this condition is satisfied,
the target current that is set in 2TR-TGT2 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs on the 1st/2nd side occurs (mottled
image/density loss due to excessive transfer/toner scattering on solid
image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV2, TR-PPR2, TR-CLR2, 2TR-
TGT2
TR-DUP3 Sec trns indiv setting feed side: set 3
Lv.2 Details To set the feed side for setting 3.
Setting 3 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV3,
TR-PPR3, TR-CLR3 and TR-DUP3. When this condition is satisfied,
the target current that is set in 2TR-TGT3 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs on the 1st/2nd side occurs (mottled
image/density loss due to excessive transfer/toner scattering on solid
image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV3, TR-PPR3, TR-CLR3, 2TR-
TGT3
8
Service Mode > COPIER > ADJUST > HV-TR
8 Service Mode > COPIER > ADJUST > HV-TR
COPIER > ADJUST > HV-TR
TR-DUP4 Sec trns indiv setting feed side: set 4
Lv.2 Details To set the feed side for setting 4.
Setting 4 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV4,
TR-PPR4, TR-CLR4 and TR-DUP4. When this condition is satisfied,
the target current that is set in 2TR-TGT4 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs on the 1st/2nd side occurs (mottled
image/density loss due to excessive transfer/toner scattering on solid
image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV4, TR-PPR4, TR-CLR4, 2TR-
TGT4
TR-DUP5 Sec trns indiv setting feed side: set 5
Lv.2 Details To set the feed side for setting 5.
Setting 5 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV5,
TR-PPR5, TR-CLR5 and TR-DUP5. When this condition is satisfied,
the target current that is set in 2TR-TGT5 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs on the 1st/2nd side occurs (mottled
image/density loss due to excessive transfer/toner scattering on solid
image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: 1-sided, 2: Auto 2-sided, 3: Multi-purpose Tray 2-sided
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV5, TR-PPR5, TR-CLR5, 2TR-
TGT5
8-84
8-84