Canon imageRUNNER ADVANCE C2030 Service Manual page 840

2) Click [MEAP Application Management].
3) Click [Stop] button of the application you want to stop on the MEAP Application
Management page.
4) Click the application of which license has been installed.
5) Click [License Control], and then click [Disable]. Click [Yes] in a confirmation window for
disabling the license.
6) Click [Download] under "Download/delete Disabled License File" item. Following the
instructions on the window, specify the location to save the file. Set a distinctive name
for the disabled license file so that you can recognize it for which application. After you
download the disabled license file to your PC, click [Delete]. Click [Yes] in a confirmation
window for license deletion.
7) Return to the MEAP Application Management page, click [Uninstall] button of the
application you want to uninstall. Click [Yes] in a confirmation window for uninstallation. If
there are several applications, repeat the procedures 1) to 7).
8) After the use of the HDD Data Encryption & Mirroring Kit-C Series is started, re-install the
application using an application file (jar file) of each application from SMS and the disabled
license file (lic file).
8. User Authentication Information Registered by SSO-H (Single Sign-ON H)
In the case that the MEAP login application has been changed to SSO-H, there is a need to
make a backup of the user authentication information.
1) Access the URL given below.
http://[IP address of the device]:8000/sso/
2) Login with the user name and password registered as an administrator in SSO-H.
The default administrator user name and password are as follows:
User Name: Administrator
Password: password
3) Click [User Control].
4) Put a checkmark to Select All, and then click [Export].
5) Leave the file format and character code as defaults and click [Start Export].
6) Following the instructions on the window, specify the location to save the file and click
[Save].
9
Installation > Combination of HDD Options How to check this Installation procedure > Making a Backup of the Data (reference only)
9. Backup of User inbox/Advanced Box document data
NOTE:
Some of the products do not have the Box/Advanced Box function.
The procedure of backup and restoration of a box document data is described below.
Specify the backup destination of a document data:
Specify an address, a user name, a password, and a path to the SMB server where a backup
of a document data.
CAUTION: Points to note when backing up the Advanced Box
The data of the Advanced Box stored in a high-capacity HDD cannot be backed up, but
the backed up data from a standard HDD to the File Server can be restored to a high-
capacity HDD.
Depending on the version of the system software of the host machine, the data of the
Advanced Box stored in a high-capacity HDD can be backed up/restored using a USB
external HDD.
CAUTION: Data which cannot be backed up
If you back up/restore stored data without restarting the machine after changing the
language displayed on the touch panel display by pressing [Settings/Registration] >
[Preferences] from the control panel of the machine, the stored data may not be backed
up/restored properly. For more information on the data that cannot be backed up, see
Points to Note for Installation.
CAUTION:
If the language setting in the common specification settings (Settings/Registration) is
set to ON, 'host address' and 'path to folder' might not be displayed correctly or cannot
be referred.
9 Installation > Combination of HDD Options How to check this Installation procedure > Making a Backup of the Data (reference only)
9-105
9-105