3) Remove the Controller Cover by holding [A] part.
• 1 Screw (The removed screw will be used in "Installing the Card Reader" step 4.)
• 2 Connectors (for the HDD model)
CAUTION:
When handling the hard disc, be careful not to vibrate or drop it.
9
Installation > Copy Card Reader-F1 > Installation Procedure > Installing the Card Reader
[A]
x2
F-9-110
9
Installation > Copy Card Reader-F1 > Installation Procedure > Installing the Card Reader
■ Installing the Card Reader
1) Remove the Face Plate.
• Face Plate (The removed Face Plate will not be used.)
• 3 Screws (The removed screws will be used in step 3.)
x3
2) Install the Card Spacer.
9-51
F-9-111
F-9-112
9-51