Canon imageRUNNER ADVANCE C2030 Service Manual page 336

4
Parts Replacement and Cleaning > Disassembly/Assembly - Pickup Feed System - > Removing the Multi-purpose Tray Pickup Roller
3) Open the Pickup Roller Retainer to right and left, and remove it in the direction of the arrow.
4) Fit the 2 protrusions on a new Pickup Roller into the groove, and install it in the direction of
the arrow.
Protrusion
Groove
4 Parts Replacement and Cleaning > Disassembly/Assembly - Pickup Feed System - > Removing the Multi-purpose Tray Pickup Roller
Pickup Roller
Retainer
Pickup Roller Unit
Pickup Roller
Retainer
F-4-169
Protrusion
Groove
F-4-170
5) Place a paper onto the Multi-purpose Tray Pickup Roller, and install the roller by pushing it
in.
CAUTION:
Check that the Multi-purpose Tray Pickup Roller is secured.
6) Install the Multi-purpose Tray Pickup Roller Cover.
4-88
F-4-171
4-88