Disassembly/Assembly - Laser Control System; Cleaning The Dustproof Glass - Canon imageRUNNER ADVANCE C2030 Service Manual

4
Parts Replacement and Cleaning > Disassembly/Assembly - Laser Control System - > Cleaning the Dustproof Glass

Disassembly/Assembly - Laser Control System -

Cleaning the Dustproof Glass

Preparation
1) Open the shutter of the Dustproof Glass.
Service Mode: COPIER > FUNCTION > MISC-P > SHT-OPEN
2) Pull out the Drum Unit.
Procedure
NOTE:
In this procedure, procedure for (C) is described. Be sure to perform the same
procedure for (Bk), (M), and (Y).
1) Remove the Dustproof Glass cleaning tool from the Front Cover.
4 Parts Replacement and Cleaning > Disassembly/Assembly - Laser Control System - > Cleaning the Dustproof Glass
2) Insert the Dustproof Glass cleaning tool into the groove, and clean the Dustproof Glass.
CAUTION:
When pulling the Dustproof Glass cleaning tool out, be sure to pull it out while pushing
the lever toward right direction.
If it is pulled out abruptly, it may come in contact with the ITB.
F-4-43
4-44
Groove
Dust-blocking Glass Cleaning tool
F-4-44
4-44