Canon imageRUNNER ADVANCE C2030 Service Manual page 199

2
Process/Operation > MEAP > Using USB Devices > USB Device report print
3) Press or button for several times until [USBH-PRT] is shown. Press [USBH-PRT]
button.
4) When pressing [OK] button, [ACTIVE] blinks on the status field.
5) When [OK] is shown on the status field, the status print is output. Check the contents of the
print.
2 Process/Operation > MEAP > Using USB Devices > USB Device report print
Example of output result
USB device information
T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver=2.00 Cls=00(>ifc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04bb ProdID=0c2a Rev=bb.03
S: Manifacturer=I-O DATA
S: Product=USB Flash Disk
S: SerialNumber=A0C0470407000073
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I: If#= 0 Alt=0 #EPs=2 Cls=08(stor.) Sub=06 Prot=50 Driver=sub-storage
E: Ad=81(I) Atr=02(Bulk) MxPS=512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS=512 Ivl=31875us
F-2-270
MEAP oreferred device information
AppID=8c72686b-29c2-46c5-a07a-a6c4177a6le3
AppID=8c72686b-29c2-46c5-a07a-a6c4177a6le3
AppID=8c72686b-29c2-46c5-a07a-a6c4177a6le3
F-2-271
● USB device information Content
Display the information of the USB device, which the device recognized.
If not displayed, there may be some fault occurred.
Some of standard optional devices are not displayed on a report.
The details of each item are as follows.
T : Topology
D : Device
F-2-272
********************************
*** USB Device report print ***
********************************
Application ID Vendor ID
Internal hierarchical structure, which a USB device is connected, is shown. The number of
a connected bus, the hierarchical structure and connection speed can be indicated.
Information of USB devices is shown.
2-165
VID=04A9 PID=2680
VID=1234 PID=5678
VID=4321 PID=8765
Product ID
F-2-273
2-165