4
Parts Replacement and Cleaning > Disassembly/Assembly- Main Controller system - > Removing the Controller Cover
Disassembly/Assembly- Main Controller system -
Removing the Controller Cover
Preparation
1) Remove the Rear Upper Cover.
2) Remove the Right Upper Sub Cover.
Procedure
NOTE:
The following describes the procedure for the HDD model. For the models without the
HDD, start from step 2.
1) Remove the HDD Power Cable when the HDD is installed.
• 2 Connectors
4
Parts Replacement and Cleaning > Disassembly/Assembly- Main Controller system - > Removing the Controller Cover
x2
F-4-26
2) Remove the Controller Cover in the direction of the arrow.
• 1 Screw
4-38
F-4-27
4-38