Canon imageRUNNER ADVANCE C2030 Service Manual page 663

COPIER > OPTION > FNC-SW
CDS-FIRM Set to allow firmware update by admin
Lv.1 Details To set whether to permit update of the firmware by user (administrator).
When "1: Enabled" is set, Updater can be activated from the user
mode.
Use case When allowing the administrator to update the firmware
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 1: Europe, 0: Other than Europe
CDS-MEAP Set to allow MEAP install by admin
Lv.1 Details To set whether to permit the user (administrator) to install MEAP
applications and enable iR options from CDS.
When "1: Enabled" is set, Updater can be activated from the user
mode.
Use case When allowing the administrator to install MEAP applications and
enable iR options from CDS
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 1
Supplement/memo CDS: Contents Delivery System
CDS-UGW Set to allow firmware update from UGW
Lv.1 Details To set whether to permit update of the firmware from the UGW server.
When "1: Enabled" is set, Updater accepts the operation from the
UGW server in cooperation with CDS.
Use case When allowing update of the firmware from the UGW server
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
Supplement/memo CDS: Contents Delivery System
INVALPDL Disable of PDL license
Lv.1 Details To disable the registered PDL license.
When "1: Disabled" is set, PDL is disabled even if a PDL license is
registered. This is set to the machines installed at convenience stores,
which do not allow PDL to be used.
Use case When prohibiting the use of PDL
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Registered PDL license is enabled, 1: Disabled
Default value 0
8
Service Mode > COPIER > OPTION > FNC-SW
8 Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
LOCLFIRM Set to allow firmware update by file
Lv.1 Details To set whether to permit the user (administrator) to update the
firmware from the remote UI using a local file.
This update is executed as a measure for vulnerability in emergency
situations.
Use case When allowing the administrator to update the firmware using a file
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 1
RSHDW-SW ON/OFF of remote shutdown
Lv.1 Details A shared multi-function machine is not likely to be shut down at power
failure. Set ON/OFF of the remote shutdown function to prevent
accident.
When "1: ON" is set, the machine can be shut down from the remote
shutdown menu displayed in the remote UI.
Use case When preventing an accident at specified power-off time.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
MC-FANSW Setting of Controller Fan control
Lv.1 Details To set full speed/half speed to fan control of the Controller Fan 1 and 2.
When "1: Full speed" is set, the heat exhaust efficiency is enhanced.
Use case - When HDD damage occurs multiple times
- When the machine is installed in high temperature environment in
which HDD damage is likely to occur
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Half speed, 1: Full speed
Default value 0
PRE-CURL ON/OFF of curl alleviation mode: Heavy
Lv.1 Details To set ON/OFF of curl alleviation mode for heavy paper, etc.
When 1 is set, the initial rotation is extended and the paper intervals
become wider. As a result, paper curl can be alleviated, but
productivity decreases.
Use case When heavy paper is curled
Adj/set/operate method Enter the setting value, and then press OK key.
Caution - Be sure to get approval from the user by telling that productivity
decreases.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode SORTER> OPTION> CURL-HVY
8-111
8-111