Initializing The Password - Canon imageRUNNER ADVANCE C2030 Service Manual

2
Process/Operation > MEAP > Initializing the Password > Procedure to initialize the SMS login password
3) When login service application you have selected turns to Start after Restart, restart the
device.
CAUTION:
In case that the login method to a device is set to SSO-H, if you log in SMS with RLS
authentication, no selection is displayed although it is the screen to change the login
method.
This is the specification to prevent the inconsistent setting which enables to stop SMS
Installer Service (Password Authentication) by changing the login method to Default
Authentication.
When you want to change the login method to a device, log in the SMS with the
password authentication.
2 Process/Operation > MEAP > Initializing the Password > Procedure to initialize the SMS login password

Initializing the Password

■ Outline
When a user forgets the password to log in to SMS, initialize it to the default value of
"MeapSmsLogin" using the switch license for initializing passwords. Follow the steps below:
■ Procedure to initialize the SMS login password
1) Get the switch license for initializing the password.
Request the support of the regional headquarters of the Canon for switch license for
initializing the password presenting the device serial number.
2) Click [Login] button leaving Password field blank or entering incorrect password. The
Return to install Password Settings area appears. Click [Browse..] button and select the
F-2-210
switch license file prepared in advance.
3) When you click [Initialize] button, the confirmation message appears. Click [OK] button.
Then Login page opens. Enter the default password 'MeapSmsLogin' to log in. The
F-2-211
password is case-sensitive.
Note:
If you click [Cancel] button, the Login page opens without initializing the password.
2-144
F-2-212
2-144