Canon imageRUNNER ADVANCE C2030 Service Manual page 632

COPIER > ADJUST > HV-TR
TR-ENV2 Sec trns indiv setting environment:set 2
Lv.2 Details To set the environment (absolute moisture content) for setting 2.
Setting 2 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV2,
TR-PPR2, TR-CLR2 and TR-DUP2. When this condition is satisfied,
the target current that is set in 2TR-TGT2 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs due to the environment occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: Low humidity (Absolute moisture content: 5.8 g/m3 and less)
2: Normal humidity (5.9 to 15 g/m3)
3: High humidity (15.1 g/m3 and more)
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-PPR2, TR-CLR2, TR-DUP2, 2TR-
TGT2
TR-ENV3 Sec trns indiv setting environment:set 3
Lv.2 Details To set the environment (absolute moisture content) for setting 3.
Setting 3 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV3,
TR-PPR3, TR-CLR3 and TR-DUP3. When this condition is satisfied,
the target current that is set in 2TR-TGT3 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs due to the environment occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: Low humidity (Absolute moisture content: 5.8 g/m3 and less)
2: Normal humidity (5.9 to 15 g/m3)
3: High humidity (15.1 g/m3 and more)
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-PPR3, TR-CLR3, TR-DUP3, 2TR-
TGT3
8
Service Mode > COPIER > ADJUST > HV-TR
8 Service Mode > COPIER > ADJUST > HV-TR
COPIER > ADJUST > HV-TR
TR-ENV4 Sec trns indiv setting environment:set 4
Lv.2 Details To set the environment (absolute moisture content) for setting 4.
Setting 4 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV4,
TR-PPR4, TR-CLR4 and TR-DUP4. When this condition is satisfied,
the target current that is set in 2TR-TGT4 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs due to the environment occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: Low humidity (Absolute moisture content: 5.8 g/m3 and less)
2: Normal humidity (5.9 to 15 g/m3)
3: High humidity (15.1 g/m3 and more)
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-PPR4, TR-CLR4, TR-DUP4, 2TR-
TGT4
TR-ENV5 Sec trns indiv setting environment:set 5
Lv.2 Details To set the environment (absolute moisture content) for setting 5.
Setting 5 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV5,
TR-PPR5, TR-CLR5 and TR-DUP5. When this condition is satisfied,
the target current that is set in 2TR-TGT5 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs due to the environment occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: Low humidity (Absolute moisture content: 5.8 g/m3 and less)
2: Normal humidity (5.9 to 15 g/m3)
3: High humidity (15.1 g/m3 and more)
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-PPR5, TR-CLR5, TR-DUP5, 2TR-
TGT5
8-80
8-80