Canon imageRUNNER ADVANCE C2030 Service Manual page 759

■ Contents of Printer Cover-D2
[1] Printer Top Cover X 1 [2] Printer Top Front
Cover X 1
[4] Reader Right [5] Screw
Cover X 1 (Binding; M4x6) X 6
[7] USB Port Seal X 1
9
Installation > Unpacking
Unpacking
[3] Reader Left Cover X 1
1) Unpack the host machine.
1.Installing the Cassette Pedestal (Refer to Installation Procedure for the Cassette Pedestal.)
2. Installing the DADF (if it is an option) (Refer to Installation Procedure for the DADF.)
3.Installing the host machine
[6] Screw
(RS Tightening;
M3x8.5) X 6
2) Holding the 4 handles on the left and right sides, lift the main body down from pallet.
F-9-40
9 Installation > Unpacking
NOTE:
When installing the host machine and the options at the same time, install the options
first by following the procedure below for better workability.
NOTE:
When installing the host machine and the USB Device Port at the same time, install
the USB Device Port before installing the Control Panel (after step 10 of "Installing the
Printer Cover").
CAUTION:
• he maximum weight of the machine including the approx. 95kg (the host machine
with 2 cassettes + DADF). Be sure to work with 4 or more people when lifting it.
• In addition, be sure to keep the machine leveled when lifting it.
• Because the center of gravity will be placed at rear, be careful not to loose balance
when lifting it.
Handle
9-24
Handle
F-9-41
9-24