Canon imageRUNNER ADVANCE C2030 Service Manual page 700

COPIER > OPTION > USER
FILE-OF File send prohibition to entered address
Lv.1 Details To set to prohibit address entry at the time of file transmission.
File transmission is not available by entering the address because of
no display of "File" on the transmission screen.
The addresses already registered in the Address Book can be used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution To restrict addresses for transmission, be sure to manually delete
them because the addresses registered in the Address Book can be
used.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
MAIL-OF Mail send prohibition to entered address
Lv.1 Details To set to prohibit address entry at the time of e-mail transmission.
E-mail transmission is not available by entering the address because
of no display of "E-Mail" on the transmission screen.
The addresses already registered in the Address Book can be used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution To restrict addresses for transmission, be sure to manually delete
them because the addresses registered in the Address Book can be
used.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
IFAX-OF IFAX send prohibition to entered address
Lv.1 Details To set to prohibit address entry at the time of I-Fax transmission.
IFAX transmission is not available by entering the address because of
no display of "I-Fax" on the transmission screen.
The addresses already registered in the Address Book can be used.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution To restrict addresses for transmission, be sure to manually delete
them because the addresses registered in the Address Book can be
used.
Display/adj/set range 0 to 1
0: Enabled, 1: Disabled
Default value 0
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
LDAP-DEF Initial condtn set of LDAP server search
Lv.1 Details To set initial condition for search target attribute that is specified at the
time of LDAP server Details search.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 6
0: Name, 1: E-mail, 2: FAX, 3: Organization, 4: Organization unit, 5:
No registration 1 (any setting), 6: No registration 2 (any setting)
Default value 0
Related service mode COPIER > OPTION > USER > LDAP-SW
FREE-DSP Display/hide of charge disable screen
Lv.2 Details To set whether to display or hide the Use Charge Management screen
for switching between charge and no charge.
The hardware switch for switching charge/no charge in the Coin
Manager enables the mode in which all the services are available
for free (store manager mode) by temporarily releasing the charging
system.
Even without the hardware switch, the mode can be switched with the
software switch when it is set to display the Use Charge Management
screen in Settings/Registration.
Use case When enabling all the services to be provided for free by temporarily
releasing the charging system
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
TNRB-SW Setting of Toner Cntner counter display
Lv.2 Details To set whether to display or hide the Toner Container counter on the
Counter Check screen.
Use case When not showing the screen to users
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: Hide, 1: Display (Toner Container counter only), 2: Display (Toner
Container counter + ejection counter)
Default value 0
8-148
8-148