Canon imageRUNNER ADVANCE C2030 Service Manual page 512

E Detail Location Item
Code Code
E56F 0001 05 Title Shift Roller Release Motor fails to move from HP
Description At initial rotation, when the Motor rotates for specified period of
time and cannot move from HP, it is detected as an error if the
same symptom occurs again after the first retry
Remedy 1. Check if the Motor (M5) Connector is physically removed.
2. Replace the Motor.
3. Check if the Shift Roller Release Sensor (S3) Connector is
physically removed.
4. Replace the Shift Roller Release Sensor (S3).
E56F 0002 05 Title Shift Roller Release Motor fails to return to HP
Description At initial rotation, when the Motor rotates for specified period
of time and cannot return to HP, it is detected as an error if the
same symptom occurs again after the first retry.
Remedy 1. Check if the Motor (M5) Connector is physically removed.
2. Replace the Motor.
3. Check if the Shift Roller Release Sensor (S3) Connector is
physically removed.
4. Replace the Shift Roller Release Sensor (S3).
E571 0001 05 Title Gripper Open/Close Motor fails to move from HP
Description At initial rotation, when the Motor rotates for specified period of
time and cannot move from HP, it is detected as an error if the
same symptom occurs again after the first retry.
Remedy 1. Check if the Motor (M7) Connector is physically removed.
2. Replace the Motor.
3. Check if the Gripper Arm HP Sensor (S13) Connector is
physically removed.
4. Replace the Gripper Unit HP Sensor (S13).
E571 0002 05 Title Gripper Open/Close Motor fails to return to HP
Description At initial rotation, when the Motor rotates for specified period
of time and cannot return to HP, it is detected as an error if the
same symptom occurs again after the first retry.
Remedy 1. Check if the Motor (M7) Connector is physically removed.
2. Replace the Motor.
3. Check if the Gripper Arm HP Sensor (S13) Connector is
physically removed.
4. Replace the Gripper Unit HP Sensor (S7).
E575 0001 05 Title Gripper Unit Move Motor fails to move from HP
Description At initial rotation, when the Motor rotates for specified period of
time and cannot move from HP, it is detected as an error if the
same symptom occurs again after the first retry.
Remedy 1. Check if the Motor (M2) Connector is physically removed.
2. Replaec the Motor.
3. Check if the Gripper Unit HP Sensor (S7) Connector is
physically removed.
4. Replace the Gripper Unit HP Sensor (S7).
7
Error Code > Error Code > Error Code Details
Description
7 Error Code > Error Code > Error Code Details
E Detail Location Item
Code Code
E575 0002 05 Title Gripper Unit Move Motor fails to return to HP
Description At initial rotation, when the Motor rotates for specified period
of time and cannot return to HP, it is detected as an error if the
same symptom occurs again after the first retry.
Remedy 1. Check if the Motor (M2) Connector is physically removed.
2. Replace the Motor.
3. Check if the Gripper Unit HP Sensor (S7) Connector is
physically removed.
4. Replace the Gripper Unit HP Sensor (S7).
7-38
Description
T-7-6
7-38