Troubleshooting Items; Troubleshooting Items List; Image Failure - Canon imageRUNNER ADVANCE C2030 Service Manual

Troubleshooting Items

Troubleshooting Items List

Category

Image failure

Soil/spots Dots image in whole
White dots/spots image in whole
Solid image on the 2nd side and magenta spots
on the trailing edge of paper
Trace of Upstream Brush
Drum Ghost
Fogging on Bk-color
Actions to be taken when image smear due to
condensation occurred
Actions to be taken when water drop marks
appear on the 2nd side
Actions to be taken when image smear due to
condensation occurred
Soil/lines Roller trace on transparency
distortion Image distortion
Operation failure Abnormal noise during pickup from Cassette 2
Second Delivery Tray full detection error (020A
jam occurrence)
Document falling from Inner Finisher
Frequent occurrence of E040-0002
Waste toner leak
Alignment error in Inner Finisher
JAM "0d91"during the PG print
6
Troubleshooting > Troubleshooting Items > Image Failure > Dots image in whole
Item Reference
6-10
6-11
6-12
6-13
6-14
6-15
6-17
6-16
6-17
6-17
6-18
6-19
6-19
6-20
6-20
6-21
6-23
6-23
6 Troubleshooting > Troubleshooting Items > Image Failure > Dots image in whole
Image Failure
■ Dots image in whole
Feed direction
[Location]
Developing Assembly or Upstream/Downstream Auxiliary Roller, and Drum
[Cause]
This failure occurs because toner aggregate inside the machine is adhered on the drum
through the Developing Cylinder or Upstream/Downstream Auxiliary Roller at the time of
delivery.
T-6-9
[Condition]
This failure occurs when the machine is moved (vibrated) while the life of the Drum Unit is
close to the end and toner aggregate exists inside the machine
[Field Remedy]
It can be alleviated by opening and closing the Front Door and performing warm-up rotation.
Perform the operation 1 to 3 times. (When performing the operation 3 times, degree of
alleviation increases.)
6-10
F-6-7
6-10