Canon imageRUNNER ADVANCE C2030 Service Manual page 720

COPIER > TEST > PG
COLOR-M M color output setting at test print
Lv.1 Details To make a setting of M color output for test print.
The setting is applied to all types.
When setting "COLOR-M" to 1 and other items to "0", a single M
color is output.
Use case At test print
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Not output, 1: Output
Default value 1
COLOR-C C color output setting at test print
Lv.1 Details To make a setting of C color output for test print.
The setting is applied to all types.
When setting "COLOR-C" to 1 and other items to "0", a single C color
is output.
Use case At test print
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Not output, 1: Output
Default value 1
COLOR-K Bk color output setting at test print
Lv.1 Details To make a setting of Bk color output for test print.
The setting is applied to all types.
When setting "COLOR-K" to 1 and other items to "0", a single Bk
color is output.
Use case At test print
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Not output, 1: Output
Default value 1
F/M-SW Setting of PG full color/mono color
Lv.1 Details To set for the output in full color/monochrome color with PG.
Use case When separating (identifying) the cause whether it's due to color or
monochrome.
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: Full color, 1: Monochrome color
Default value 0
8
Service Mode > COPIER > TEST > PG
8 Service Mode > COPIER > TEST > PG
COPIER > TEST > PG
PG-PICK Setting of test print pickup cassette
Lv.1 Details To set the pickup cassette for test print output.
Use case At trouble analysis
At test print output
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 8
1: Cassette1, 2: Cassette2, 3: Cassette3, 4: Cassette4, 5: Not use, 6:
Multi-purpose Tray, 7 to 8: Not used
Default value 1
2-SIDE Setting of PG 2-sided mode
Lv.1 Details To set 1-sided/2-sided print for PG output.
Use case At trouble analysis
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0: 1-sided, 1: 2-sided
Default value 0
PG-QTY Setting of PG output quantity
Lv.1 Details To set the number of sheets for PG output.
Use case At trouble analysis
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 999
Unit 1 sheet
Default value 1
8-168
T-8-57
8-168