Canon imageRUNNER ADVANCE C2030 Service Manual page 839

3. Settings/Registration Export Procedure
1) Access the URL given below, and then access Remote UI.
http://[IP address of the device]/
If the system administrator ID and password are set, a dialog box to enter the user name
and password appears. Enter the system administrator ID in User Name and the password
in Password, and then click [Administrator Login].
2) Select [Settings/Registration] > [Management Settings] > [Data Management] > [Import/
Export].
3) Click [Settings/Registration].
4) Click [Export], and click [Start Export].
5) Following the instructions on the window, specify the location to save the file.
4. Printer Settings Export Procedure
1) Access the URL given below, and then access Remote UI.
http://[IP address of the device]/
If the system administrator ID and password are set, a dialog box to enter the user name
and password appears. Enter the system administrator ID in User Name and the password
in Password, and then click [Administrator Login].
2) Select [Settings/Registration] > [Management Settings] > [Data Management] > [Import/
Export].
3) Click [Printer Settings].
4) Click [Export], and click [Start Export].
5) Following the instructions on the window, specify the location to save the file.
5. Paper Information Export Procedure
1) Access the URL given below, and then access Remote UI.
http://[IP address of the device]/
If the system administrator ID and password are set, a dialog box to enter the user name
and password appears. Enter the system administrator ID in User Name and the password
in Password, and then click [Administrator Login].
2) Select [Settings/Registration] > [Management Settings] > [Data Management] > [Import/
Export].
3) Click [Paper Information].
4) Click [Export], and click [Start Export].
5) Following the instructions on the window, specify the location to save the file.
9
Installation > Combination of HDD Options How to check this Installation procedure > Making a Backup of the Data (reference only)
6. Backup of MEAP Application
When a MEAP application has been installed, the data and license that the MEAP application
retains will be deleted. If no MEAP application is installed, there is no need to make a backup.
If a MEAP application has a backup function, make a backup of the data peculiar to the
MEAP application using this function. With regard to the license, there is a need to stop all
applications from SMS (Service Management Service), invalidate the license, and download
the invalid license file.
CAUTION: MEAP Backup Function Using the SST
Data that has been backed up using MEAP back of the SST before the use of the HDD
Data Encryption & Mirroring Kit-C Series is started must not be written back to the Host
machine after the use of the HDD Data Encryption & Mirroring Kit-C Series is started.
Similarly, even if the data that has been backed up after the use of the HDD Data
Encryption & Mirroring Kit-C Series is started is written back to the Host machine before
the use of the HDD Data Encryption & Mirroring Kit-C Series is started, the machine
does not operate. It is necessary to make sure that the implementation conditions for
the HDD Data Encryption & Mirroring Kit-C Series are compatible before and after
making a backup of data, and the MEAP backup function does not permit making a
backup of data in the course of installing the kit.
The overview of procedures for stop of MEAP applications, Disabling of the license, and
download of an Disabled license file is described below. For more information, see the MEAP
SMS Administrator Guide.
7. Stop of MEAP Applications, Disabling, Download of Disabled License Files and
Uninstallation
1) Select the URL given below and access SMS.
http://[IP address of the device]:8000/sms/
The default password is MeapSmsLogin. If the user has changed the password, ask him/
her to change the password again after the use of the HDD Data Encryption & Mirroring
Kit-C Series is started.
CAUTION:
Ask the user to change the password because the SMS password is initialized after the
use of the HDD Data Encryption & Mirroring Kit-C Series is started.
9 Installation > Combination of HDD Options How to check this Installation procedure > Making a Backup of the Data (reference only)
9-104
9-104