Canon imageRUNNER ADVANCE C2030 Service Manual page 606

COPIER > ADJUST > CCD
MTF4-S7 MTF value 7 setting: vert scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this at the normal service.
Display/adj/set range 20 to 80
Default value 55
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF4-S8 MTF value 8 setting: vert scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this at the normal service.
Display/adj/set range 20 to 80
Default value 55
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF4-S9 MTF value 9 setting: vert scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this at the normal service.
Display/adj/set range 20 to 80
Default value 55
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF4-S10 MTF value 10 setting: vert scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this at the normal service.
Display/adj/set range 20 to 80
Default value 55
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
MTF4-S11 MTF value 11 setting: vert scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this at the normal service.
Display/adj/set range 20 to 80
Default value 55
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
8
Service Mode > COPIER > ADJUST > IMG-REG
8 Service Mode > COPIER > ADJUST > IMG-REG
COPIER > ADJUST > CCD
MTF4-S12 MTF value 12 setting: vert scan [Back]
Lv.1 Details Setting value for MTF filter coefficient calculation.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use this at the normal service.
Display/adj/set range 20 to 80
Default value 55
Related service mode COPIER> FUNCTION> CCD> MTF-CLC
■ IMG-REG
COPIER > ADJUST > IMG-REG
REG-H-Y Adj Y color write start pstn: horz scan
Lv.1 Details To adjust the write start position of yellow color image in the
horizontal scanning direction in increments of 1 pixel.
Use case When yellow color displacement in the horizontal scanning direction
occurs
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution Do not use this at the normal service.
Display/adj/set range -128 to 127
Unit 1 pixel
Default value 0
REG-H-C Adj C color write start pstn: horz scan
Lv.1 Details To adjust the write start position of cyan color image in the horizontal
scanning direction in increments of 1 pixel.
Use case When cyan color displacement in the horizontal scanning direction
occurs
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution Do not use this at the normal service.
Display/adj/set range -128 to 127
Unit 1 pixel
Default value 0
REG-H-K Adj Bk color write start pstn: horz scan
Lv.1 Details To adjust the write start position of black color image in the horizontal
scanning direction in increments of 1 pixel.
Use case When black color displacement in the horizontal scanning direction
occurs
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution Do not use this at the normal service.
Display/adj/set range -128 to 127
Unit 1 pixel
Default value 0
8-54
T-8-17
8-54