Min And Max Scaling Fields; Markers/Range Field - Agilent Technologies HP 1660E Series User Manual

Logic analyzers

Table of Contents

Logic Analyzer Reference

The Chart Menu

Min and Max scaling fields

When State is selected for the X axis, the minimum and maximum

values can range from -8192 to +8192 for the 1660E-series logic

analyzers, depending on the trace point location. For the 1670E-series

logic analyzers, the values can range from -1 M to +1 M.

When Label is selected for either axis, the minimum and maximum

values range from 00000000 hex to FFFFFFFF hex regardless of the

axis, because labels are restricted to 32 bits.

The Marker/Range field is a toggle field. If the field is set to Range, X

and Y range fields become available to set the chart minimum and

maximum range points. If the field is set to Markers, a marker selection

menu appears with marker choices available with the present analyzer

configuration.

In a state analyzer with Count Off in the Trigger menu, only Pattern

markers are available. With Count Time on, Time markers and

Statistics markers become available. With Count States on, States

markers are available. The markers function just like those of the

Waveform and Listing displays.