Table of Contents
Advertisement
Firmware configuration
Web-based instructions in this guide are applicable to both the Remote Manager and the local
web interface.
Command line.
n
A robust command line allows you to perform all configuration and management tasks from
within a command shell. Both the Remote Manager and the local web interface also have the
option to open a terminal emulator for executing commands on your IX10 device. See
the command line
configure your IX10 device.
In this guide, task topics show how to perform tasks:
Web
Shows how to perform a task by using the local web interface.
Command line
Shows how to perform a task by using the command line interface.
Using Digi Remote Manager
By default, your IX10 device is configured to use Digi Remote Manager as its central management
server. Devices must be registered with Remote Manager, either:
As part of the getting started process. See the
n
If you have not registered your device already, you can add a device to Remote Manager. See
n
Add a device to Digi Remote
For information about configuring central management for your IX10 device, see
management.
Using the local web interface
To connect to the IX10 local Web UI:
1. Use an Ethernet cable to connect the IX10's ETH port to a laptop or PC.
2. Open a browser and go to 192.168.210.1.
3. Log into the device using a configured user name and password.
The default user name is admin and the default password is the unique password printed on
the label packaged with your device.
After logging in, the local web admin dashboard is displayed.
The dashboard shows the current state of the device.
Dashboard
area
Description
Summarizes network statistics: the total number of bytes sent and received over all
Network
configured bridges and Ethernet devices.
activity
Digi Remote
Displays the device connection status for Digi Remote Manager, the amount of time
Manager
the connection has been up, and the Digi Remote Manager device ID.
IX10 User Guide
for more information about using the command line to manage and
Manager.
Using Digi Remote Manager
Quick Start Guide
for further information.
Using
Central
44
Advertisement
Table of Contents
