Table of Contents
Advertisement
Containers
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show status of a specific container
Use the
show containers container name
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> show containers container test_lxc
Container
---------
test_lxc
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Schedule a script to run in the container
This simple example will:
1. Start the container in non-persistent mode.
2. Execute a ping command every ten seconds from inside the container.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Web UI:
IX10 User Guide
command to show the status of the specified container:
Configured
Enabled
----------
-------
True
enabled
Use Digi Remote Manager to view and manage your
Schedule a script to run in the container
State
-----------------
RUNNING PID 19327
693
Advertisement
Table of Contents
