Table of Contents
Advertisement
Interfaces
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Select the appropriate WAN or WWAN on which SureLink should be disabled..
5. After selecting the WAN or WWAN, click IPv4 > SureLink.
6. Click to expand Test targets.
7. Click to expand the second test target. This test target has its Test type set to Test DNS
servers configured for this interface.
IX10 User Guide
Wireless Wide Area Networks (WWANs)
90
Advertisement
Table of Contents
