Table of Contents
Advertisement
Central management
(config)> cloud drm reboot_timeout 600s
(config)>
The minimum value is 30 minutes and the maximum is 48 hours. If not set, this option is
disabled. The default is disabled.
12. (Optional) Determine whether to require a login and password to authenticate the user from
the remote cloud services CLI:
(config)> cloud drm cli_local_auth true
(config)>
If set to false, no login prompt will be presented and the user will be logged in as admin. The
default is false.
13. (Optional) Configure the IX10 device to communicate with remote cloud services by using SMS:
a. Enable SMS messaging:
(config)> cloud drm sms enable true
(config)>
b. Set the phone number for Digi Remote Manager:
(config)> cloud drm sms destination drm_phone_number
(config)>
c. (Optional) Set the service identifier:
(config)> cloud drm sms sercice_id id
(config)>
1. (Optional) Configure the IX10 device to communicate with remote cloud services by using an
HTTP proxy server:
a. Enable the use of an HTTP proxy server:
(config)> cloud drm proxy enable true
(config)>
b. Set the hostname of the proxy server:
(config)> cloud drm proxy host hostname
(config)>
c. (Optional) Set the port number on the proxy server that the device should connect to. The
default is 2138.
(config)> cloud drm proxy port integer
(config)>
14. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
IX10 User Guide
Configure your device for Digi Remote Manager support
59
Advertisement
Table of Contents
