Table of Contents
Advertisement
Interfaces
4. Create the LAN or select an existing LAN:
To create a new LAN, for Add interface, type a name for the LAN and click .
n
To edit an existing LAN, click to expand the LAN.
n
The Interface configuration window is displayed.
New LANs are enabled by default. To disable, toggle off Enable.
5. For Interface type, leave at the default setting of Ethernet.
6. For Zone, select the appropriate firewall zone. See
information.
7. For Device, select an Ethernet device.
8. (Optional) Click to expand 802.1x to configure 802.1x port based network access control.
The IX10 can function as an 802.1x authenticator; it does not function as an 802.1x supplicant.
a. Click to expand Authentication.
b. Click Enable server to enable the 802.1x authenticator on the IX10 device.
c. Type the Server IP address of the authentication server.
d. Server Port number defaults to 1812. Type a new port number for the authentication
server if different than the default.
e. Type the Server Password for the authentication server.
f. Set the Reauth period.
g. (Optional) Click to expand Accounting.
h. Click Enable server to enable 802.1x authentication auditing on the IX10 device.
i. Type the Server IP address of the auditing server.
j. Server Port number defaults to 1813. Type a new port number for the auditing server if
different than the default.
k. Type the Server Password for the auditing server.
9. Configure IPv4 settings:
a. Click to expand IPv4.
IPv4 support is enabled by default.
b. For Type, select Static IP address.
IX10 User Guide
Local Area Networks (LANs)
Firewall configuration
for further
127
Advertisement
Table of Contents
