Table of Contents
Advertisement
Revision
Date
F
December 2021
IX10 User Guide
Description
button, waiting for the device to reboot, then
pressing the ERASE again.
Added ability to override or edit SSH server options.
n
Add option to utilize GPS from cellular modem as a
n
source for the Location service
Added options for filtering Wi-Fi scanner results based
n
off of MAC addresses or RSSI signal strength.
Added options for sending local device event logs to
n
Digi Remote Manager.
New system time CLI command for manually setting
n
the local date and time.
New firewall packet filter options to allow/deny
n
packets based off of a range of source or destination
MAC addresses.
New monitoring metrics upload CLI command to
n
send on-demand health metrics to Digi Remote
Manager.
Added support for the configuration of custom scripts
n
that will be run manually, and a new system script
start CLI command to run manual scripts.
New "Find me" feature that flashes cellular-related
n
LEDs to help locate the device onsite and a new
system find-me command.
Added datapoint.upload_multiple function to
n
digidevice python module for uploading multiple
datapoints to DigiRM at once.
Added clear dhcp-lease command to remove all
n
dynamic DHCP leases or certain DHCP leases based on
MAC address or IP address.
Added speedtest command for performing on-demand
n
iPerf or nuttcp speedtests.
Local users are now required to be assigned to an
n
authentication group.
New Network → Advanced → Sequential DHCP address
n
allocation configuration setting for controlling if DHCP
addresses are assigned sequentially or randomly
(disabled by default).
Added ability to control if DHCP addresses are assigned
n
sequentially or randomly (disabled by default).
Added 802.1x port-based network access control,
n
configurable per network interface.
Release of Digi IX10 firmware version 21.11:
4
Advertisement
Table of Contents
