Using Cellular Modems In A Wireless Wan (Wwan) - Digi IX10-00G4 User Manual

Table of Contents

Advertisement

Interfaces

Using cellular modems in a Wireless WAN (WWAN)

The IX10 supports one cellular modem, named Modem, which is included in a preconfigured Wireless
WAN, also named Modem.
The cellular modem can have only one active SIM slot at any one time. For example, Modem can have
either SIM1 or SIM2 up at one time.
Typically, you configure SIM1 of the cellular modem as the primary cellular interface, and SIM2 as the
backup cellular interface. In this way, if the IX10 device cannot connect to the network using SIM1, it
automatically fails over to SIM2. IX10 devices automatically use the correct cellular module firmware
for each carrier when switching SIMs.
Configure cellular modem
Configuring the IX10's cellular modem involves configuring the following items:
Required configuration items
Enable the cellular modem.
n
The cellular modem is enabled by default.
Configure the criteria used to determine which modem this modem configuration applies to.
n
Determine the SIM slot that will be used when connecting to the cellular network.
n
Configure the maximum number of interfaces that can use the modem.
n
Enable carrier switching, which allows the modem to automatically match the carrier for the
n
active SIM.
Carrier switching is enabled by default.
Configure the access technology.
n
Determine which cellular antennas to use.
n
Additional configuration items
If Active SIM slot is set to Any, determine the preferred SIM slot.
n
In the event of a failover to a non-preferred SIM, or if manual SIM switching is used to switch to
a non-preferred SIM, the modem will attempt to reconnect to the SIM in the preferred SIM slot.
To configure the modem:
  Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
IX10 User Guide
Wireless Wide Area Networks (WWANs)
Use Digi Remote Manager to view and manage your
92

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ix10Ix10-00n4

Table of Contents