Table of Contents
Advertisement
Services
Velocity
Direction
Quality
UTC Date and Time : Mon, 13 June 2022 20:07:32 03
No. of Satellites : 7
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show geofence information
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show location geofence
> show location geofence
Geofence
-------------
test_geofence
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Modbus gateway
The IX10 supports the ability to function as a Modbus gateway, to provide serial-to-Ethernet
connectivity to Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), and other
industrial devices. MODBUS provides client/server communication between devices connected on
different types of buses and networks, and the IX10 gateway allows for communication between
buses and and networks that use the Modbus protocol.
This section contains the following topics:
Configure the Modbus gateway
Show Modbus gateway status and statistics
IX10 User Guide
: 0 meters per second
: None
: Standard GNSS (2D/3D)
command at the system prompt:
Status
State
Transitions
------
------
-----------
Up
Inside
0
Modbus gateway
Last Transition
---------------
477
490
476
Advertisement
Table of Contents
