Table of Contents
Advertisement
Virtual Private Networks (VPN)
1. Click Network > Interfaces.
2. For Add Interface, type gre_interface1 and click .
3. For Zone, select Internal.
4. For Device, select the GRE tunnel created in
5. Click to expand IPv4.
6. For Address, type 172.31.0.1/30 for a virtual IP address on the GRE tunnel.
7. Click Apply to save the configuration and apply the change.
Command line
1. At the command line, type config to enter configuration mode:
> config
(config)>
2. Add an interface named gre_interface1:
(config)> add network interface gre_interface1
(config network interface gre_interface1)>
IX10 User Guide
Generic Routing Encapsulation (GRE)
Task three
(IP tunnel: gre_tunnel1).
358
Advertisement
Table of Contents
