Table of Contents
Advertisement
Routing
Configure a static route
A static route is a manually configured routing entry. Information about the route is manually entered
rather than obtained from dynamic routing traffic.
Required configuration items
The destination address or network.
n
The interface to use to reach the destination.
n
Additional configuration items
A label used to identify this route.
n
The IPv4 address of the gateway used to reach the destination.
n
The metric for the route. When multiple routes are available to reach the same destination, the
n
route with the lowest metric is used.
The Maximum Transmission Units (MTU) of network packets using this route.
n
To configure a static route:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX10 User Guide
Use Digi Remote Manager to view and manage your
IP routing
206
Advertisement
Table of Contents
