Digi IX10-00G4 User Manual page 5

Revision Date
G March 2022
IX10 User Guide
Description
Configuration option to allow for automatic update of
n
new firmware (disabled by default).
User authentication enhancements:
n
Added TACACS+ command authorization and
l
accounting for Admin CLI commands.
Added a new username alias to provide an
l
alternate username that allows for special
characters in the username.
VPN enhancements:
n
Added support for PPP-over-L2TP tunnels.
l
Changed default IPsec IKE DH group to 14 for
l
enhanced compatibility with industry standard
settings.
Location services enhancements:
n
New option for Location service to specify the
l
talker ID used in NMEA mesage strings.
Include the mode indicator field in NMEA messages
l
constructed when a GPS fix isn't obtained.
SureLink enhancments:
n
Added new settings under cellular Surelink options
l
to have the device reset the cellular modem if a
specified number of Surelink tests fail
Added show surelink Admin CLI command.
l
Serial port enhancements:
n
New option to add and configure an external USB-
l
to-serial adapter.
Disable serial history in remote access mode by
l
default.
Support for sending analog and digial I/O health
n
metrics to Digi Remote Manager.
Added show containers Admin CLI command.
n
Release of Digi IX10 firmware version 22.2:
VPN enhancements:
n
Renamed VPN > IPsec > Tunnels > Policies > Local
l
network setting to Local traffic selector and
added Remote traffic selector.
Added a Dynamic option to the Local traffic
l
selector to configuration of a local network by
protocol and/or port instead of a network address
range.
Added Protocol and Port match criteria for Local
l
5