Table of Contents
Advertisement
Containers
Configure a container
Required configuration items
The following configuration options are completed automatically if Create Configuration was
n
selected when the container was created. See
Name of the container.
l
Enable the container.
l
Whether or not the container should use the device's system libraries.
l
Determine whether or not the device should including virtual networking capabilities.
n
Additional configuration items
If virtual networking is enabled:
n
The bridge to be used to provide network connectivity.
l
A static IP address for the container.
l
The network gateway.
l
Serial ports on the device that the container will have access to.
n
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX10 User Guide
Upload a new LXC container
Use Digi Remote Manager to view and manage your
Configure a container
for details:
687
Advertisement
Table of Contents
