Serial port
Specify a device: Expand the Specify a device section and enter the IP address or host
n
name for the device.
Select a device: From the list of devices shown in the Digi Navigator, expand the
n
device that you want to configure.
5. Configure RealPort on the device.
a. Click the Configure device for RealPort button. A login screen displays.
b. Enter the device's default user name and password in the appropriate fields. The default
user name is admin and the default password is the unique password printed on the label
packaged with your device.
c. Click Submit. A progress message displays.
d. When RealPort configuration is complete, the Success message displays.
e. Click Close to close the message.
6. Configure RealPort on your computer.
a. Click Configure this PC for RealPort.
b. From the Select starting COM list box, select the first COM port that should be configured
for RealPort. The number of COM ports configured matches the number of serial ports on
the device.
c. Click Submit. A series of progress messages displays.
d. When the configuration is complete, a message displays.
e. Determine your final step:
IX10 User Guide
Digi Navigator application
197