Table of Contents
Advertisement
Serial port
Access the web UI from the Digi Navigator
You can access the web user interface for the device from the Digi Navigator.
1. Make sure you have the device powered and connected the device to your network or
computer with an Ethernet cable. See
2. Launch the Digi Navigator.
3. From the list of devices shown in the Digi Navigator, expand the device that you want to
configure.
4. Click Open next to the IP address you want to use. The login screen for the web UI launches.
a. Enter the user name and password for the IX10 in the Username and Password fields.
b. Click Login.
Filter devices for display in the Digi Navigator
You can use the Digi Navigator filters to determine the types of IX10 devices you want to display. Only
the devices that are powered on and connected to your network can be included in the Digi Navigator
display.
1. Make sure you have the device powered and connected the device to your network or
computer with an Ethernet cable. See
2. Launch the Digi Navigator.
3. Click Filters from the green toolbar to expand the toolbar and display the filter options.
IX10 User Guide
Connect to and access the Digi
Connect to and access the Digi
Digi Navigator application
Navigator.
Navigator.
202
Advertisement
Table of Contents
