Create A Directory - Digi IX10-00G4 User Manual

File system
2. At the Admin CLI prompt, type ls /path/dir_name. For example, to display the contents of the
/etc/config directory:
> ls /etc/config
-rw-r--r--
drw-------
drwxr-xr-x
-rw-r--r--
...
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Create a directory


Command line
This procedure is not available through the WebUI. To make a new directory, use the
specifying the name of the directory.
For example:
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type mkdir /path/dir_name. For example, to create a directory
named temp in /etc/config:
> mkdir /etc/config/temp
>
3. Verify that the directory was created:
> ls /etc/config
...
-rw-r--r--
-rw-------
-rw-r--r--
drwxr-xr-x
>
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
IX10 User Guide
1 root root
2 root root
3 root root
1 root root
1 root root
1 root root
1 root root
2 root root
856 Nov 20 20:12 accns.json
160 Sep 23 04:02 analyzer
224 Sep 23 04:02 cc_acl
47 Sep 23 04:02 dhcp.leases
1436 Aug 12 21:36 ssl.crt
3895 Aug 12 21:36 ssl.pem
10 Aug 5 06:41 start
160 Aug 25 17:49 temp
Create a directory
mkdir command,
755