Table of Contents
Advertisement
Virtual Private Networks (VPN)
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Disable hardware cryptographic acceleration:
(config)> system hycrypto false
>
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
The device must be rebooted for the change to take effect. See
IX10 User Guide
Reboot your IX10
device.
IPsec
310
Advertisement
Table of Contents
