Table of Contents
Advertisement
Interfaces
Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Modems > Modem.
4. Modem are enabled by default. Click to toggle Enable to off to disable.
5. For Match modem by, select the matching criteria used to determine if this modem
configuration applies to the currently attached modem:
Any modem: Applies this configuration to any modem that is attached.
n
IMEI: Applies this configuration only to a modem that matches the identified IMEI.
n
l
Port: Applies this configuration to a modem attached to the identified physical port.
n
l
The default is Any modem.
IX10 User Guide
If IMEI is selected, for Match IMEI, type the IMEI of the modem that this
configuration should be applied to.
If Port is selected, for Match Port, select the modem's port.
Wireless Wide Area Networks (WWANs)
93
Advertisement
Table of Contents
