Table of Contents
Advertisement
Interfaces
port: Applies this configuration to a modem attached to the identified physical port.
n
l
The default is any.
5. Set the SIM slot that should be used by the modem:
(config)> network modem modem sim_slot value
(config)>
where value is one of the following:
any: Uses either SIM slot.
n
1: Uses the first SIM slot.
n
2. Uses the second SIM slot.
n
The default is any.
6. If sim_slot is set to any, set the SIM slot that should be considered the preferred slot for this
modem:
(config)> network modem modem sim_slot_preference value
(config)>
where value is one of the following:
none: Does not consider either SIM slot to be the preferred slot.
n
1: Configures the first SIM slot as the preferred SIM slot.
n
2. Configures the second SIM slot as the preferred SIM slot.
n
In the event of a failover to a non-preferred SIM, or if manual SIM switching is used to switch to
a non-preferred SIM, the modem will attempt to reconnect to the SIM in the preferred SIM slot.
The default is none.
7. Set the maximum number of interfaces. This is used when using
1.
IX10 User Guide
If port is used, set modem's port:
a. Determine available ports and correct syntax by using the ?:
(config)> network modem modem port ?
Match port: The physical port that the modem device is
attached to.
Format:
/device/usb/modem/module
Default value: /device/usb/modem/module
Current value: /device/usb/modem/module
(config)> network modem modem port
b. Set the port:
(config)> network modem modem port /device/usb/modem/module
(config)>
Wireless Wide Area Networks (WWANs)
dual-APN
SIMs. The default is
95
Advertisement
Table of Contents
