Upload And Download Files Using Sftp - Digi IX10-00G4 User Manual

File system
admin@192.168.4.1's password: adminpwd
IX10-22.5.50.62.bin
>
Transfer a file from the IX10 device to a remote host
To copy a file from the IX10 device to a remote host, use the
> scp host hostname-or-ip user username remote remote-path local local-path to
remote
where:
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the location on the remote host where the file will be copied.
n
local-path is the path and filename on the IX10 device.
n
For example:
To copy a support report from the IX10 device to a remote host at the IP address of 192.168.4.1:
1. Use the system support-report command to generate the report:
> system support-report /var/log/
Saving support report to /var/log/support-report-0040D0133536-22-05-31-
9:03:04.bin
Support report saved.
>
2. Use the scp command to transfer the report to a remote host:
> scp host 192.168.4.1 user admin remote /home/admin/temp/ local
/var/log/support-report-00:40:D0:13:35:36-22-05-31-9:03:04.bin to remote
admin@192.168.4.1's password: adminpwd
support-report-0040D0133536-22-05-31-9:03:04.bin
>

Upload and download files using SFTP

Transfer a file from a remote host to the IX10 device
This example uploads firmware from a remote host to the IX10 device with an IP address of
192.168.2.1, using the username ahmed:
$ sftp ahmed@192.168.2.1
Password:
Connected to 192.168.2.1
sftp> put IX10-22.5.50.62
Uploading IX10-22.5.50.62 to IX10-22.5.50.62
IX10-22.5.50.62
100% 24M
sftp> exit
$
IX10 User Guide
830.4KB/s 00:00
Upload and download files
100% 36MB 11.1MB/s
scp command as follows:
00:03
761