Table of Contents
Advertisement
Interfaces
View default settings for the IPv6 DHCP server:
(config network interface my_lan)> ipv6 dhcpv6_server ?
DHCPv6 server: The DHCPv6 server settings for this network interface.
Parameters
---------------------------------------------------------------------
----------
enable
(config network interface my_lan)>
d. Modify any of the remaining default settings as appropriate.
8. (Optional) To configure 802.1x port based network access control:
Note
The IX10 can function as an 802.1x authenticator; it does not function as an 802.1x
supplicant.
a. Enable the 802.1x authenticator on the IX10 device:
(config network interface my_lan)> 802_1x authentication enable true
(config network interface my_lan)>
b. Set the IP address of the authentication server:
(config network interface my_lan)> 802_1x authentication ip IPv4_
address
(config network interface my_lan)>
c. Set the password for the authentication server:
(config network interface my_lan)> 802_1x authentication password
password
(config network interface my_lan)>
d. The authentication server port number defaults to 1812. To set an alternate port number:
(config network interface my_lan)> 802_1x authentication port port
(config network interface my_lan)>
e. Set the frequency period for reauthorization:
(config network interface my_lan)> 802_1x authentication reauth_period
value
(config network interface my_lan)>
where value is an integer between 0 and 86400. The default is 3600.
IX10 User Guide
Current Value
true
Enable
Local Area Networks (LANs)
131
Advertisement
Table of Contents
