Digi IX10-00G4 User Manual page 114

Interfaces
16. For APN list and APN list only, the IX10 device uses a preconfigured list of Access Point Names
(APNs) when attempting to connect to a cellular carrier for the first time. After the device has
successfully connected, it will remember the correct APN. As a result, it is generally not
necessary to configure APNs. See
instructions for setting an APN.
17. (Optional) To configure the IP address of a custom gateway or a custom netmask:
a. Click Custom gateway to expand.
b. Click Enable.
c. For Gateway/Netmask, enter the IP address and netmask of the custom gateway. To
override only the gateway netmask, but not the gateway IP address, use all zeros for the IP
address. For example, 0.0.0.0./32 will use the network-provided gateway, but with a /32
netmask.
18. Optional IPv4 configuration items:
a. Click IPv4 to expand.
b. IPv4 support is Enabled by default. Click to disable.
c. Set the MTU.
d. For Use DNS:
n
n
n
The default setting is When primary default route.
19. Optional IPv6 configuration items:
a. Click IPv6 to expand.
b. IPv6 support is Enabled by default. Click to disable.
c. Set the MTU.
d. For Use DNS:
n
n
n
The default setting is When primary default route.
1. See Configure SureLink active recovery to detect modem failures
configuring SureLink.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
IX10 User Guide
Configure cellular modem APNs
Always: DNS will always be used for this WWAN; when multiple interfaces have the
same DNS server, the interface with the lowest metric will be used for DNS
requests.
When primary default route: Only use the DNS servers provided for this WWAN
when the WWAN is the primary route.
Never: Never use DNS servers for this WWAN.
Always: DNS will always be used for this WWAN; when multiple interfaces have the
same DNS server, the interface with the lowest metric will be used for DNS
requests.
When primary default route: Only use the DNS servers provided for this WWAN
when the WWAN is the primary route.
Never: Never use DNS servers for this WWAN.
Wireless Wide Area Networks (WWANs)
for further information and
for information about
114