Table of Contents
Advertisement
User authentication
Web
1. Configure a user on the RADIUS server:
a. On the ubuntu machine hosting the FreeRadius server, open the /etc/freeradius/3.0/users
file:
$ sudo gedit /etc/freeradius/3.0/users
b. Add a RADIUS user to the users file:
admin1 Cleartext-Password := "password1"
In this example:
n
n
n
c. Save and close the users file.
2. Configure a user on the TACACS+ server:
a. On the ubuntu machine hosting the TACACS+ server, open the /etc/tacacs+/tac_plus.conf
file:
$ sudo gedit /etc/tacacs+/tac_plus.conf
b. Add a TACACS+ user to the tac_plus.conf file:
user = admin1 {
}
In this example:
n
n
n
c. Save and close the tac_plus.conf file.
3. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
4. Access the device configuration:
Remote Manager:
IX10 User Guide
Unix-FTP-Group-Names := "admin"
The user's username is admin1.
The user's password is password1.
The authentication group on the IX10 device, admin, is identified in the Unix-FTP-
Group-Names parameter.
name ="Admin1 for TX64"
pap = cleartext password1
service = system {
groupname = admin
}
}
The user's username is admin1.
The user's password is password1.
The authentication group on the IX10 device, admin, is identified in the
groupname parameter.
Example user configuration
645
Advertisement
Table of Contents
