Table of Contents
Advertisement
Interfaces
7. (Optional) To configure the device to bypass its preconfigured APN list and only use the
configured APNs:
(config)> network interface modem modem apn_lock true
(config)>
8. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
9. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show cellular status and statistics
You can view a summary status for all cellular modems, or view detailed status and statistics for a
specific modem.
Web
1. Log into the IX10 WebUI as a user with Admin access.
2. On the menu, click Status.
3. Under Connections, click Modems.
The modem status window is displayed
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX10
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show modem
To view a status summary for the modem:
n
> show modem
Modem
-----
modem
>
To view detailed status and statistics, use the
n
> show modem name modem
modem: [Telit] LM940
-------------------------------------------------------------------
IX10 User Guide
command:
SIM
Status
-------------
---------
1 (ready)
connected
Wireless Wide Area Networks (WWANs)
APN
Signal Strength
---------
--------------------
1234
Good (-84 dBm)
show modem name name
command:
100
Advertisement
Table of Contents
