M150, M200 Detailed Programming Instructions - MacDon M Series Assembly Instructions Manual

A. M150, M200 DETAILED PROGRAMMING INSTRUCTIONS
(Key On / Engine Running or Not / Header Disengaged).
(Press PROGRAM and SELECT on CDM to enter programming mode).
SIDE DISPLAY
Displays Software Revision
Status
Upper Line – D### (CDM)
Lower Line – C### (WCM)
PROGRAM SWITCH
Places Monitor Into Program Mode
Press While Depressing SELECT Switch
Press To Exit Program Mode.
Form # 169242
UNLOADING AND ASSEMBLY
MENU ITEM SCROLL BACKWARD
Displays Value Under Menu Item
Push To Scroll Backward.
62
MAIN DISPLAY
Displays Menu Item and
Selection
Upper Line – Menu Item
Lower Line - Selection
SELECT SWITCH
Places Monitor Into Program
Mode With PROGRAM SWITCH
Press to Accept Menu Item and
Advance to Next Item.
MENU ITEM SCROLL FORWARD
Displays Value Under Menu Item
Push To Scroll Forward.
(continued next page)
Model Year - 2009