Cd Method (Alternate Method); Placing System In Receive Software Upgrade Mode - Stratasys Fortus 360mc User Manual

CD METHOD (ALTERNATE METHOD)

This method is for customers who do not have web access. The Controller Software Update CD containing the
updated .upg file and must be obtained from Stratasys. Inc.
1. Insert the Controller Software Update CD into the workstation computer.
2. Make sure the system is placed in the receive software upgrade mode. (See
Receive Software Upgrade Mode" on page
3. Open the Control Center application and select the Services tab and then click Update
Software. (See
4. Browse to the location of the .upg upgrade file on the Controller Software Update CD.
5. Select the .upg file to be downloaded and then press Open. This will send the file to the Fortus
360mc/400mc.
6. When the download is complete, select Reboot and Install Software Upgrade and then press
OK at the Fortus 360mc/400mc system.
7. After the system reboots and the upgrade installation complete, two options will appear; select
Auto Home XYZ.
PLACING SYSTEM IN RECEIVE SOFTWARE UPGRADE
MODE
Place the system in software upgrade mode by doing the following:
1. Place the modeler in the Upgrade mode (Maintenance > Administration > Receive Software
Upgrade or Code).
The operator panel will display the following message.
•
2. The system is now in the receive software upgrade mode.
Figure 7-1)
>Waiting for Software Upgrade or Code
Press MENU key to Cancel
78.)
78
"Placing System in