Objet500 User Guide
2. With the object selected:
3. Click OK.
Model-Material Settings
Before placing objects on the build tray in Objet Studio, you should pay attention
to the material selection settings on the Tray Settings ribbon.
Figure 5-22 Material selection settings
DOC-07027 Rev. I
❒ From the Object menu, select Separate into Shells.
or—
❒ On the ribbon, click
A dialog box opens in which you can specify where to save the component stl
files. (By default, Objet Studio offers to save the new files in a folder in the
same location as the original stl file.)
Figure 5-20 Folder selection for saving stl files after splitting into shells
Objet Studio splits the object into an assembly of component parts, each a
separate stl file ("shell").
The object appears—on the build tray and in the model tree—as an assembly
of parts ("shells"). You can assign each part a different model material (This is
explained in "Model-Material Settings" below).
Figure 5-21 Object after being converted to an assembly of component
parts
5 Using Objet Studio
.
5-22