The Build Pages; Select Build Page - Stratasys Neo 450 User Manual

Graphical User Interface

The Build Pages

Select Build Page

This page is used for selecting a build job to load. When you select the build, the parts are
loaded and displayed in the build style page.
Build jobs that have been previously prepared using Titanium Assistant are indicated with the
'prepared for' insert.
The
The
The
Standard Builds
The Standard button lists the jobs found in the configured build folder (see Build Control
Settings).
Service Builds
The Service button lists the jobs available in the service builds folder. The service builds
include blade gap builds for setting the recoater blade at the correct height and scale bar builds
for calculating the resin shrinkage.
Blade Gap Builds
Selecting a blade gap build loads several small hollow blocks spread around the platform.
When the build has finished, the gap between the recoater blade and the top of the blocks may
be measured with feeler gauges. The correct gap is necessary to build good quality parts.
refresh button refreshes the job collection to pick up external changes.
scroll button positions the list back to the top.
© Copyright 2022 Stratasys. All rights reserved.
Figure 11: Select build page
sort buttons change the order of the viewed jobs.
The Build Pages
Page 65