Table of Contents
Advertisement
Working with the Tools Page
Tools Page Menu
The Display Area of the Tools page contains 6 buttons. With the exception of the Light button,
pressing each of these buttons will open an individual page containing printer information that
can be viewed as well as printer settings and preferences which can be configured.
Icon State
Settings
Calibration
Maintenance
Network
Power
Light
Table 12: Filament Pathway States
Pressing the Settings button opens the Settings page. From this page you can
configure and adjust several of the printer's default settings. See
(page 72)
for details.
Pressing the Calibration button opens the Calibration page. From this page you
can preform various printer calibration procedures. See
for details.
Pressing the Maintenance button opens the Maintenance page. From this
page you can perform various printer maintenance procedures. See
"Maintenance" (page 83)
Pressing the Network button opens the Network page. From this page you can
configure the printer's network connection. See
Pressing the Power button opens the Power page. From this page you can
shutdown or restart the printer. See
The Light button is the only option within the Tools page that does not open a
new page after being pressed. Instead, the Light button allows you to turn the
oven light ON and OFF. An indicator within the upper-left corner of the button
displays the current state of the oven light (ON or OFF). See
for details.
© Copyright 2020 Stratasys. All rights reserved.
Description
for details.
"Power" (page 93)
Tools Page Menu
"Settings"
"Calibration" (page 81)
"Network" (page 87)
for details.
for details.
"Light" (page 94)
Page 70
Advertisement
Table of Contents
