Table of Contents
Advertisement
Failure to completely remove all other layers from a previous build
can cause a head collision and result in system damage.
A modeling base may become worn or distorted after several
builds. The machine performs a modeling base levelness check at
the start of every part build; upon detection of a faulty modeling
base, the machine pauses and allows you to install a new one.
Loading Material
Material cartridges are factory packaged in a box and an anti-static,
moisture-proof bag to preserve shelf life. Material will stay humidity
free inside the cartridge for at least 30 days after opening. Shelf life
is more than one year if the cartridge package remains sealed.
To load material cartridges:
1. Remove packaging.
2. If present, remove the red sealing plug from the cartridge:
(see
Figure 7)
Plug must be removed before cartridge can be installed.
a. Turn the plug a quarter turn counter clockwise.
b. Lift up the plug to remove it from the cartridge -
Figure 7: Remove red plug before loading
Note
discard (or recycle) the plug.
Operation 27
Prodigy Plus User Guide
Advertisement
Table of Contents
