Proper Personal Protective Equipment (Ppe); Hazard Types; Product Safety Signs - Stratasys Origin One User Manual

Safety Instructions
• Do not look directly at projected UV light during operation, as UV exposure can cause eye
damage.
• ONLY operate with 110V, 3-prong, or 220V, 2-Prong, Grounded Power Connectors. DO
NOT replace detachable power supply cord with an inadequately rated cord.

Proper Personal Protective Equipment (PPE)

Proper PPE should be worn at all times while working around the print bench or handling
resins, solvents and cleaners, hazardous waste, etc. PPE should include but is not limited to:
• Nitrile gloves
• Lab coat
• Safety glasses
Please refer to the appropriate Safety Data Sheets for additional safety precautions and
required PPE.

Hazard Types

Stratasys recommends that all services be performed by qualified personnel. All personnel
working on or around the printer should be knowledgeable of what the following hazard
classifications mean throughout this guide.
• Warnings and Cautions precede the paragraph to which they pertain.
• Notes follow the relative paragraph.

Product Safety Signs

Warning:
Indicates a potentially hazardous situation which, if not avoided, may result in injury
or death.
Caution:
Indicates a situation which, if not avoided, could result in damage to equipment.
Indicates additional information relative to the current topic.
Always read and adhere to safety statements, and be aware of the following safety
signs when you see them on the printer.
© Copyright 2022 Stratasys. All rights reserved.
Proper Personal Protective Equipment (PPE)
Page 2